SECTION 3 - INDUSTRIAL APPLICATION
1
VECTOR 8 ENGINES
Print P2D32V001E Base - April 2006
SECTION 3
Industrial application
Page
GENERAL SPECIFICATIONS 3...............
- Clearance data - 8 cyl. 7...................
PART ONE -
MECHANICAL CO MPONENTS 9.........
ENGINE OVERHAUL 11.....................
- Preface 11..............................
- Dismantling 11...........................
- Installation of co mponents for the application 22
- Fitting the flywheel cover housing 22..........
- Fitting the rear oil seal 23...................
ENGINE FLYWHEEL 23.....................
- Fitting the engine flywheel 23................
- Fitting the gearbox 25.....................
RODS 27.................................
ROCKER ARM ASSEMBLY 27.................
ROCKER ARMS 27.........................
JUMPERS 27...............................
ROCKER ARM SUPPORT ROCKERS 27........
- Adjusting operating clearance between valves and
rockers 28..............................
- Fitting the cylinder head tappet covers 30......
- Fitting the injectors 30.....................
LUBRICATION 31..........................
- Oil pump 32.............................
COMPLETING THE ENGINE 33..............
COMMON RAIL ASSEMBLY PROCE DURE 38...
- Preparing for assembly 38..................
- Cleaning and preparation 38................
- Assembly procedure 38....................
- Test procedure for checking for diesel leaks
from the Common Rail system. 39............
- Checks and inspections 41..................
To Next Page
Loading...
Need help?
General
