9 - 1
You must grease the machine regularly to keep it working
efficiently. Regular greasing will also lengthen the machine's
working life.
The machine must always be greased after pressure
washing or steam cleaning.
Greasing should be done with a grease gun. Normally, two
strokes of the gun should be enough. Stop greasing when
fresh grease appears at the joint.
See Fluids, Lubricants, Capacities and Specifications for
the recommended grease.
See Service Schedules for the recommended greasing
intervals.
In the following illustrations the grease points are numbered.
Count them off as you grease them.
Refit the grease point dust caps after greasing.
!!
WARNING
You will be working close into the machine for these
jobs. Lower the attachments if possible. Remove the
starter key and disconnect the battery. This will prevent
the engine being started. Make sure the parking brake is
engaged.
Chock all four wheels before getting under the machine.
2-3-2-1
Section 3 Routine Maintenance
9803/7130
Section 3
9 - 1
Issue 1
Grease (Daily)
To Next Page
Loading...
Need help?
General
