27 - 2
➀ Note:The total hydraulic system capacity depends on the equipment being used. Fill with all rams closed. Watch level
indicator on hydraulic tank.
➁ JCB HP Grease is the recommended specification grease, if using JCB MPL-EP then the greasing must be carried out
more frequently.
➂ ! WARNING: Waxoyl contains turpentine substitute, which is inflammable. Keep flames away when applying Waxoyl.
Waxoyl can take a few weeks to dry completely. Keep flames away during the drying period. Do not weld near the affected
area during the drying period. Take the same precautions as for oil to keep Waxoyl off your skin. Do not breathe the fumes.
Apply in a well-ventilated area.
GEN-1-3
Coolant Mixtures
!!
WARNING
Antifreeze can be harmful. Obey the manufacturers instructions when handling neat or diluted antifreeze.
7-3-4-4
The protection provided by JCB Four Seasons Antifreeze is shown below. If any other anti-freeze is used, refer to the
manufacturers' instructions and ensure that a corrosion inhibitor is included. DO NOT use solutions of more than 60% or less
than 50% or damage to the cooling system will occur.
55% Solution - Maintains circulation down to -36 deg C (-33 deg F), Protects against damage down to -41 deg C (-42 deg F)
The strength of the anti-freeze solution must be checked at least once a year, preferably at the beginning of the cold period. It
is an advantage to leave the anti-freeze in all the year round as it gives continued protection against corrosion. Always renew
the anti-freeze every two years. A 50% anti-freeze mixture must be used even if frost protection is not needed. This gives
protection against corrosion and raises the coolant's boiling point.
Section 3 Routine Maintenance
9803/7130
Section 3
27 - 2
Issue 1
Fluids, Lubricants, Capacities and Specifications
To Next Page
Loading...
Need help?
General
