− 136 −
14. INPUT NUMBER TABLE
Name Connecting connector No.
Air pressure detection MAIN CN-30
Origin sensor on marking light fine adjustment side MAIN CN-36-6
Corner knife motor origin sensor MAIN CN-37-6
Back tack motor origin sensor
MAIN CN-38-6
Thread breakage detection (left) INTA CN62A-2
Thread breakage detection (right)
INTA CN63A-2
Material sensor
INTA CN65A-3
Clamp foot step-out detection INTA CN66A-3
Binder open detection
INTA CN68A-1
Binder up detection
INTA CN71A-3
Marking light origin sensor
INTA CN75A-2
Clamp foot origin detection INTA CN77A-2
Center knife lift detection INTA CN79A-1
Flap sensor (left) INTB CN60B-2
Flap sensor (right)
INTB CN61B-2
Corner knife drawer detection switch INTB CN62B-2
Bobbin thread remaining amount detection (left) INTB CN64B-2
Bobbin thread remaining amount detection (right)
INTB CN64B-5
Start switch
INTB CN65B-3
Temporary stop switch
INTB CN69B-1
Pedal volume sensor INTB CN75B-2
Roller lift detection INTB CN83A-19
Stacker open detection
INTB CN83B-13
Stacker origin
INTB CN83B-15
Corner knife fixing side, right lifting detection INTB CN79B
Corner knife fixing side, right lowering detection INTB CN80B
Corner knife fixing side, left lifting detection INTB CN81B
Corner knife fixing side , left lowering detection INTB CN82B
Corner knife moving side, left lowering detection MAIN CN125-2
Corner knife moving side, left lifting detection MAIN CN125-5
Corner knife moving side, right lowering detection MAIN CN126-2
Corner knife moving side, right lifting detection MAIN CN126-5
Fixing side index motor origin
MAIN CN127
Moving side index motor origin
MAIN CN128
Flap angle detection sensor
INTB CN63B-2
To Previous Page
Loading...
Need help?
General
