− 33 −
(6) Sewing screen (Cycle sewing mode)
Symbol Name of button Description
A
INTERLINING SUPPLYING button When this button is pressed, interlining is supplied.
＊
This is displayed when “With” of
, automatic interlining supplying device is set
with optional setting.
B
TYPE OF WELT CHANGE-OVER button Type of welt change-over screen is displayed, and change-over of type of welt and
adjustment of parallelism of the binder can be performed.
C
CLAMP UP PROHIBITION AT SEWING END
button
When this button is held pressed, the clamp is returned in the lowered state at the time of
sewing end.
It is convenient to use this button at the time of adjustment of marking light and trial sewing.
D
DIRECT PATTERN LIST button Direct pattern list screen is displayed and selection of the sewing data can be performed.
E
CYCLE DATA display All pattern data that have been registered to the cycle sewing data are displayed.
F
COUNTER CHANGE-OVER button When this button is pressed, display of sewing counter and number of pcs. counter is
changed over. This button is displayed only when both sewing counter and number of pcs.
counter are ON.
G
COUNTER VALUE CHANGE button Counter value which is displayed at present is changed.
H
BOBBIN THREAD (RIGHT) REMAINING
AMOUNT
This button detects light from bobbin and informs that bobbing thread remaining amount is
running out. When one stitching completes, the counter value is subtracted, and the counter-
up screen is displayed when “0” is reached.
＊
This button is displayed only when the reecting light from bobbin is detected.
I
BOBBIN THREAD (LEFT) REMAINING
AMOUNT
This button detects reecting light from bobbin and informs that bobbin thread remaining
amount
is running out. When one stitching completes, the counter value is subtracted, and
the counter-up screen is displayed when “0” is reached.
＊
This button is displayed only when the reecting light from bobbin is detected.
J
LEFT SCROLL button Pattern data to be sewn next is moved forward by one. In case of the rst pattern, it moves
to the last pattern.
K
RIGHT SCROLL button Pattern data to be sewn next is moved backward by one. In case of the last pattern, it moves
to the rst pattern.
L
MARKING LIGHT SETTING button Marking light setting screen is displayed, and changeover of marking light irradiation position
and setting of change of marking light set value , and
are performed.
＊
It is possible to customize display/non-display of the respective buttons.
For the details, refer to
“
^
-13. CUSTOMIZING THE DATA INPUT SCREEN” p.80
.
L
A B C
G
F
K
J
E
H
I
D
To Next Page
Loading...
Need help?
General
