− −
@
. CONFIGURATION OF THE MACHINE
The APW-896 consists mainly of the following units.
A
Frame and structural components (Framesewing table, covers, foot switch, etc.)
B
Clamp foot unit and feed mechanism
C
Corner knife unit
D
Binder unit (Binder components and its driving components)
E
Pneumatic control unit (Pneumatic control devices and pipings)
F
Stacker unit (Optional)
G
Sewing machine head
H
Electric control unit (Control panel)
I
Operation panel
J
Power switch (Also used as the emergency stop switch)
K
T
emporary stop switch
With this machine consisting of the aforementioned 11 units, you can do desired welting work simply
by setting materials (garment body, interlining piece, welting patch, etc.) in place and operating the
switches on the operation panel.
In addition, when temporary stop switch
K
is pressed during operation of the device, the device stops.
G
I
A
F
B
E
C
J
D
H
K
To Next Page
Loading...
Need help?
General
