ā 47 ā
(5) Naming the pattern
1
Display the input screen
When the input screen of independent sewing mode, alternate sewing mode and cycle sewing mode is
displayed, it is possible to input the name to the pattern data.
2
Call the character input screen
Press CHARACTER INPUT button
A
and the character input screen (screen B) is displayed.
3
Input the character
It is possible to input the character by pressing CHARACTER button
B
you desire to input. As many as
14 characters of characters ( to and to ) and symbols ( , , , , and
) can be inputted. Cursor can be moved with CURSOR LEFT MOVE button
C
and CURSOR
RIGHT MOVE button
D
. When you desire to erase the inputted character adjust the cursor to the
position of the character you desire to erase and press ERASE button
E
.
4
End the character input
Press ENTER button
F
to end the character input. After the end, the inputted character is
displayed at the upper part of the input screen.
A
A
A
Data input screen (screen A)
Character input screen (screen B)
B
E
C D
F
B
E
C D
F
B
E
C D
F
To Next Page
Loading...
Need help?
General
