– 155 –
9-11. Maintenance management function
1)
❶
held pressed for three second.
The "mode screen" is displayed.
When the set value for the counter is reached, this function gives a warning on the screen. As many as ve
dierent set values can be registered for warning.
❶
❸
❷ ❺
❹
2) Select "8. Maintenance management set-
ting".
3) When the counter for which the set value for
warning is selected, the "warning counter
setting screen" is displayed.
4) When
❷
is pressed, the "warning
counter type selection screen" is displayed.
<Warning counter setting screen>
To Next Page
Loading...
Need help?
General
