– 98 –
7. CARE
Perform the maintenance below every day for longer use of your machine.
The maintenance mode should be used for maintenance of the sewing machine.
7-1. Standby mode
Be sure to check that the screen has
changed to the maintenance mode
screen so as to prevent accidents
caused by abrupt start of the sewing ma-
chine.
Under the standby mode, the sewing machine does not start running even if the pedal is depressed.
Under this mode, the jog dial is also disabled. It is therefore necessary to turn the handwheel by hand
if the needle bar position has to be adjusted.
1) When standby switch
❶
is pressed on the
sewing machine start screen, the sewing ma-
chine enters the standby mode.
2) Under the standby mode, the message is dis-
played and the standby switch lights up.
❶
3) When standby switch
❶
is pressed under the
standby mode, the screen returns to the previ-
ous screen.
To Next Page
Loading...
Need help?
General
