– 24 –
2-20-2. Names and functions of the panel keys
Switch/display Description
❶
Mode key This switch is used for displaying the menu screen.
❷
Information key This switch is used for displaying the information screen.
❸
Sewing pattern No. button This switch is used for displaying the number of the sewing pattern.
❹
Simplied screen lock button This button is used for displaying the simplied lock status of the screen on it.
Locked: Unlocked:
❺
Sewing-start reverse-feed
stitch button
This switch is used for changing the ON/OFF status of the reverse feed stitching at the
beginning of sewing. When reverse feed stitching at the beginning of sewing is placed in
the OFF state, mark is displayed at the upper left of the button.
❻
Sewing-end reverse-feed
stitch button
This switch is used for changing the ON/OFF status of reverse feed stitching at the end
of sewing. When reverse feed stitching at the end of sewing is placed in the OFF state,
mark is displayed at the upper left of the button.
❼
Part number In the case the part number/process display is selected with U404, the part number is
displayed. In the case the comment display is selected, the comment is displayed.
❽
Process/comment In the case the part number/process display is selected with U404, the process is
displayed. In the case the comment display is selected, the comment is displayed.
❾
Clock display The time set on the sewing machine is displayed in this eld in 24-hour system.
Sewing pattern display The selected sewing pattern is displayed in this eld.
Customization button 1 A selected function can be allocated to and registered with this button. Initially, the
sewing counter has been factory-allocate and -registered.
Customization buttons 2 - 7 A selected function can be allocated to and registered with this button.
Customization buttons 2 - 11 A selected function can be allocated to and registered with this button.
* Conrmation of data
To change the pattern number, select the pattern you want to use rst.
Then, conrm your selection by pressing .
For the setting items of the Memory switch or sewing pattern, change the target data and press to conrm
the change.
After the setting data on the number of stitches of reverse-feed stitching or the number of stitches of multi-layer
stitching has been changed, the changed setting data is conrmed by pressing .
<Operator mode> <Maintenance personnel mode>
*
Changeover between the operator mode and the maintenance personnel mode is carried out by pressing
❶
and
❷
simultaneously.
❹ ❶❸
❷❻
❺ ❼
❽ ❾ ❹ ❶❸
❷❻
❺ ❼
❽ ❾
To Next Page
Loading...
Need help?
General
