– 53 –
6-2-3. Reverse feed stitching (at start) pattern
A stitch shape of the reverse feed stitching (at start) is set by following the steps of procedure described below.
(1) Enabling the reverse feed stitching (at start) pattern
①
Displaying the edit screen for reverse feed stitching (at start)
❶
held pressed for one second. The
reverse feed stitching (at start) edit screen is
displayed.
②
Setting the number of stitches and the number of repetitions of reverse feed stitching at the be-
ginning of sewing
Change the number of reverse feed stitches with
❷
.
Change the number of repetitions of reverse feed
stitching with
❸
. (In the case of setting
the number of times of reverse feed stitching to
"2", the sewing machine performs reverse feed
stitches by the set number of stitches once in the
normal direction and once in the reverse feed
direction respectively.)
The value you have entered is conrmed by
pressing
❹
Then, the sewing screen is
displayed.
<Edit screen for reverse feed stitching
(start) (operator mode)>
The sewing-start reverse feed stitching pattern
can be operated when the sewing-start reverse
feed stitching function is placed in the ON state
( mark is not displayed).
If this function is placed in the OFF state, press
the sewing start reverse feed stitch button to
switch o mark display to enable the sew-
ing-start reverse feed stitching function.
(2) Changing the number of stitches and pitch of reverse feed stitching (at start) pattern
◆
In the case of operator mode
❶
❹❷ ❷
❸
To Next Page
Loading...
Need help?
General
