– 38 –
4-8. LED hand light
WARNING :
In order to protect against personal injury due to unexpected start of the sewing machine, never bring
hands near the needle entry area or place foot on the pedal during the adjustment of intensity of the LED.
* This LED is intended to improve operability
of the sewing machine and is not intended for
maintenance.
The sewing machine is provided as standard with an
LED light which illuminates the needle entry area.
Intensity adjustment and turn-o of the light is carried
out by pressing switch ❶. Every time the switch is
pressed, the light is adjusted in intensity in six steps
and is turned o in turn.
[Change of intensity]
1
⇒
...... 5
⇒
6
⇒
1
Bright
⇒
...... Dim
⇒
O
⇒
Bright
In this way, every time the switch ❶ is pressed, the
hand lamp status is changed in repetition.
4-9. Reverse feed stitching
[One-touch type reverse feed stitching mecha-
nism]
The hand switch ❶ is pressed, the machine performs
reverse feed stitching.
The machine resumes normal feed stitching the mo-
ment the switch lever is released.
❶
❶
4-10. Jog dial
When jog dial
❶
is pressed, the needle up/down cor-
rection switch function works. The function of switch
can be changed. (Refer to
"4-11. Custom switch"
p.39
)
The pulley is rotated by turning jog dial
❶
.
❶
To Next Page
Loading...
Need help?
General
