JUKI LU-2828V-7 User Manual

– 162 –
❼
5) In the case the cover sensor function is
placed in ON, it is necessary to set the ON/
OFF status of the respective cover sensors.
When the cover sensor of which is to be set
is selected, the cover-sensor ON/OFF setting
screen for the selected cover is displayed.
6) Place the selected over sensor in ON if it is
used, or in OFF if not.
7) Press
❼
to conrm the setting.
<Cover sensor device setting screen>
<Needle bar cover sensor ON/OFF setting screen>
1. The cover sensor device does not function only by setting the ON or OFF of the corresponding cov-
er. Place the cover sensor function in ON on the cover-sensor function ON/OFF setting screen.
2. The cover sensor for the hook (left) is not used for the LU-2828V. Place the cover sensor for hook (left)
in OFF.

JUKI LU-2828V-7 Specifications

General

Brand	JUKI
Model	LU-2828V-7
Category	Sewing Machine
Language	English