Accessing the SRX220 Services Gateway
Two user interfaces are available for monitoring, configuring, troubleshooting, and
managing the SRX220 Services Gateway:
•
J-Web interface: Web-based graphical interface that allows you to operate a services
gateway without commands. The J-Web interface provides access to all Junos
functionality and features.
•
Junos OS command-line interface (CLI): Juniper Networks command shell that runs
on top of a UNIX-based operating system kernel. The CLI is a straightforward command
interface. On a single line, you type commands that are executed when you press the
Enter key. The CLI provides command Help and command completion.
Related
Documentation
SRX220 Services Gateway Specifications on page 29•
• SRX220 Services Gateway Hardware Features on page 4
SRX220 Services Gateway Hardware Features
Table 4 on page 4 lists the hardware features supported on the SRX220 Services
Gateway models with 1 GB memory. For information on the models with 2 GB memory,
see SRX220 Services Gateway Hardware Guide for H2 Model Numbers.
Table 4: SRX220 Services Gateway Hardware Features
SRX220 Services Gateway
with PoE (SRX220H-POE)SRX220 Services Gateway (SRX220H)Feature
1 GB1 GBDDR memory
YesNoPoE support
100 to 240 VAC input
200 W, 54V DC output
100 to 240 VAC input
60 W, 12V DC output
Power supply adapter
35 W28 WAverage power consumption (no Mini-PIMs
installed, no PoE power draw)
88Gigabit Ethernet ports
11Console port
22USB ports
22Mini-PIM slots
Status, Alarm, HA, Power,
Mini-PIMs, Port (TX/RX and PoE)
Status, Alarm, HA, Power, Mini-PIMs, Port
(TX/RX)
LEDs
Copyright © 2016, Juniper Networks, Inc.4
SRX220 Services Gateway Hardware Guide for H Model Numbers
To Next Page
Loading...
Need help?
General
