• SRX220 Services Gateway Power Specifications and Requirements on page 37
SRX220 Services Gateway Power Specifications and Requirements
The AC power system electrical specifications for the SRX220 Services Gateway are
listed in Table 18 on page 37.
Table 18: Power Supply Electrical Specifications for the SRX220 Services
Gateway
SpecificationPower Requirement
100 to 240 VACAC input voltage
47 to 63 HzAC input line frequency
1.5 A maximum for standard model (without
PoE)
2.5 A maximum for PoE model
AC system current rating
WARNING: The AC power cord for the services gateway is intended for use
with the device only and not for any other use.
Related
Documentation
• SRX220 Services Gateway Power Supply on page 23
• SRX220 Services Gateway Site Electrical Wiring Guidelines on page 35
• SRX220 Services Gateway Grounding Specifications on page 65
• Interface Cable and Wire Specifications for the SRX220 Services Gateway on page 39
37Copyright © 2016, Juniper Networks, Inc.
Chapter 7: Power Requirements and Specifications
To Next Page
Loading...
Need help?
General
