CHAPTER 9
Installation Overview
•
Installation Overview for the SRX220 Services Gateway on page 45
•
Required Tools and Parts for Installing and Maintaining the SRX220 Services
Gateway on page 46
•
SRX220 Services Gateway Autoinstallation Overview on page 47
Installation Overview for the SRX220 Services Gateway
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in Table 22 on page 45.
Table 22: Installation Process Order for the SRX220 Services Gateway
For more information, seeTaskStep
“SRX220 Services Gateway General Safety
Guidelines and Warnings” on page 127
Review the relevant safety
guidelines.
1
“Site Preparation Checklist for the SRX220
Services Gateway” on page 27
Verify that you have prepared your
site for the installation of the
services gateway, using the
checklist.
2
“Unpacking the SRX220 Services Gateway” on
page 49
“Verifying Parts Received with the SRX220
Services Gateway” on page 49
Unpack the services gateway, and
verify that you have received all
the parts.
3
“Preparing the SRX220 Services Gateway for
Rack-Mount and Wall-Mount Installation” on
page 53
Prepare the services gateway for
installation.
4
“Installing the SRX220 Services Gateway in a
Rack” on page 57
“Installing the SRX220 Services Gateway on a
Wall” on page 60
Install the services gateway.5
45Copyright © 2016, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
