Juniper SRX220 Hardware Guide

Table 27: SRX220 Services Gateway Preinstallation Checklist for
Wall-Mount Installation
Additional InformationTask
“Site Preparation Checklist for the
SRX220 Services Gateway” on page 27
Verify that the site meets the requirements.
“Unpacking the SRX220 Services
Gateway” on page 49
Remove the services gateway chassis from the
shipping box.
Verify that you have the following parts available in
your wall-mounting kit to mount the SRX220 Services
Gateway on a wall:
•
Wall-mounting brackets
•
Screws
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
Related
Documentation
• Unpacking the SRX220 Services Gateway on page 49
• Preparing the SRX220 Services Gateway for Rack-Mount Installation on page 53
55Copyright © 2016, Juniper Networks, Inc.
Chapter 11: Installing the Mounting Hardware

Juniper SRX220 Specifications

General

Brand	Juniper
Model	SRX220
Category	Gateway
Language	English