Juniper SRX320 Hardware Guide

CHAPTER 5
Power System Description
•
Understanding the SRX320 Services Gateway Power Supply on page 15
Understanding the SRX320 Services Gateway Power Supply
The power supply for the SRX320 Services Gateway is external. You must use the
following power supply adapters provided by Juniper Networks to provide power to the
services gateway.
•
75 W, 12 V power supply adapter for non-PoE models
•
280 W, 54 V power supply adapter for PoE models
Each PoE port delivers a maximum power of 30 W. Because of line loss, the powered
device connected to a PoE port can use only 25.5 W of power. Line loss is influenced
by cable length, quality, and other factors and is typically less than 16 percent of the
maximum power.
Related
Documentation
• Understanding the SRX320 Services Gateway Front Panel on page 5
• Understanding the SRX320 Services Gateway Back Panel on page 8
15Copyright © 2016, Juniper Networks, Inc.

Juniper SRX320 Specifications

General

Firewall throughput	1000 Mbit/s
Number of users	50 user(s)
Quality of Service (QoS) support	Yes
Mobile VPN IPSec	250
IPS/IDS throughput	100 Mbit/s
USB 2.0 ports quantity	1
Connectivity technology	Wired
SFP module slots quantity	2
Ethernet LAN (RJ-45) ports	6
Internal memory	4000 MB
Flash memory	8000 MB
Storage media type	Flash
Power consumption (typical)	27 W
Heat dissipation	157 BTU/h
Concurrent connections	64000
Mean time between failures (MTBF)	284700 h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Routing protocols	BGP, CLNS, IS-IS, OSPF, RIP-1, RIP-2

Weight and Dimensions

Weight	1510 g
Dimensions (WxDxH)	299.9 x 43.9 x 191 mm