CHAPTER 11
Installation Overview
•
SRX320 Services Gateway Installation Overview on page 43
•
Required Tools and Parts for Installing the SRX320 Services Gateway on page 44
•
SRX320 Services Gateway Autoinstallation Overview on page 44
SRX320 Services Gateway Installation Overview
After you have prepared the site for installation and unpacked the SRX320 Services
Gateway, you are ready to install the device. It is important to proceed through the
installation process in the following order:
1. Review the safety guidelines explained in “SRX320 Services Gateway General Safety
Guidelines and Warnings” on page 111.
2. Prepare your site for the installation of the services gateway as described in “Site
Preparation Checklist for the SRX320 Services Gateway” on page 20.
3. Prepare the services gateway for installation. See:
•
Preparing the SRX320 Services Gateway for Rack-Mount Installation on page 49
•
Preparing the SRX320 Services Gateway for Wall-Mount Installation on page 50
•
Preparing the SRX320 Services Gateway for Desk-Mount Installation on page 50
4. Install the services gateway. See:
•
Installing the SRX320 Services Gateway in a Rack on page 53
•
Installing the SRX320 Services Gateway on a Desk on page 56
•
Installing the SRX320 Services Gateway on a Wall on page 57
5. Connect cables to external devices.
6. Connect the grounding cable as described in “Connecting the SRX320 Services
Gateway Grounding Cable” on page 62.
7. Power on the services gateway as described in “Powering On the SRX320 Services
Gateway” on page 68.
Related
Documentation
Required Tools and Parts for Installing the SRX320 Services Gateway on page 44•
43Copyright © 2016, Juniper Networks, Inc.