Kärcher HDS 8/18 M Service Manual

78 English 5.906-432.0 Rev. 00 (06/15)
7.8 RFID query
Function Adjustments
LED indicator Important
45 °C
+
„SET“
(40/-- °C
+
„SET“)
RFIDONOFF
Information to the printed
circuit board whether the
device is equipped with
feed via RFID.
Device with RFID Menu access:
Select 45°C
Switch off device. Hold
SET. Turn on the ma-
chine. Release SET.
Select settings with
SET.
Device without
RFID
Check the setting
when replacing
the printed circuit
board.
7.9 Testing the temperature sensor
Function Adjustments
LED indicator Important
50 °C
(43/36 °C)
NTCTEST
Display of the water tem-
perature measured by the
temperature sensor.
The value is shown digit
by digit by the LEDs.
Example:
A temperature of 27°C is
measured.
The LEDs light up in the
following order:
- PAUSE -
Digit value "0"
Digit value "1"
Digit value "2"
Digit value "3"
Digit value "4"
Digit value "6"
... ...
Note
At a temperature below 0?, "0" is displayed.

Kärcher HDS 8/18 M Specifications

General

Brand	Kärcher
Model	HDS 8/18 M
Category	Pressure Washer
Language	English