Lace Work
0 Stitch selector: 5
(_) Stitch length: 1 to 3
I_ Needle thread tension: 1 to4
(_ Presser foot: Zigzag foot
Lace adds a fanciful, feminine touch to blouses and
lingerie.. Table linens and pillows become more
elegant when trimmed with lace.
Fold raw edge of fabric at least 5/8" (1o5cm)oPlace
lace underneath and topstitch with blind hem stitch.
Trim excess fabric close to stitching_
Multiple Zigzag Stitch
(_) Stitch selector: 4
(_) Stitch length: 0.5 to I
(_) Needle thread tension: 1 to 4
(_ Presser foot: Zigzag foot
This is used to finish seam allowance on synthetics and
other fabrics that tend to pucker° The stitch is also excellent
for darning and mending tears.
[] Seam finishing
Place fabric under the presser foot in such a manner that
the edge is slightly inside the right-hand side of the presser
foot. Guide the fabric so that the right hand stitches fall at
the edge of the fabdc.
[] Mending
Position tear under the needle so that the stitch catches
both sides.
0
PATTERN_
®
LENGTH
®
j
0 ®
""> PA'I-rERN _
< _ LENGTH
F
[]
f
[]
_ ,J
T
48
To Next Page
Loading...
Need help?
General
