SAFETY PRECAUTIONS 1-9
4. Observe all local traffic and safety
regulations.
5. Turn the headlights on. Dim them
when meeting another vehicle.
6. Drive at speeds that allow you to main-
tain control at all times.
7. Do not apply the differential lock while
traveling at road speeds. The tractor
may run out of control.
8. Avoid sudden movements of the steer-
ing wheel as it can cause a loss of con-
trol of the tractor. This risk is espe-
cially great when traveling at road
speeds.
9. Do not operate an implement while the
tractor is on the road. Lock the three
point hitch in the raised position.
10.When towing other equipment, use a
safety chain and place an SMV em-
blem on it as well.
1. Disengage the P.T.O, lower all
implements, place all control levers in
the neutral position, set the parking
brake, stop the engine and remove the
key.
PARKING THE TRACTOR
C71O119A
(1) P.T.O Shaft Cover (2) P.T.O Shaft Cap
OPERATING THE P.T.O
1. Make sure the tractor is completely
stopped, and all moving components
have completely stopped before
connecting, disconnecting, adjusting,
cleaning or servicing any P.T.O driven
equipment.
2. Keep the P.T.O shaft cover in place at
all times. Replace the P.T.O shaft cap
when the shaft is not in use.
C71O120B
To Next Page
Loading...
Need help?
General
