6-16 DK65S
CHECK AND ADJUSTMENT OF TOE-IN
C71O621A
CHECK
Improper toe-in adjustment of the front
wheels causes vibration and excessive
tire wear. When adjusted properly, dimen-
sion B should be greater than dimension
A by 2 to 8 mm (0.08 to 0.32 in.)
(A) Front Dimension (B) Rear Dimension
(C) Front of Tractor
STEERING WHEEL PLAY
Check steering wheel play with the en-
gine running at idle speed. The free travel
should not exceed 20 to 25 mm (.8 to 1.0
inch).
C71O620B
5. After bleeding the system, while the
pedal is still depressed, tighten the
bleeder valve securely.
6. Repeat the process for the opposite
side brake.
7. Always check the oil level in the reser-
voir before operating the tractor and fill
as needed.
CAUTION
DO NOT mix brake oil of any other
type or brand. A chemical reaction
may occur that may degrade brak-
ing performance or cause cata-
strophic failure.
Use only DAEDONG approved brake
oil.
To Next Page
Loading...
