4-14 DK65S
C71O427B
Move the front wheel drive lever rear-
ward (B) to engage the front wheel drive
mechanism. For ordinary farming work,
keep the lever in the forward position (A)
to operate in the 2WD mode.
FRONT WHEEL DRIVE IS EFFECTIVE FOR
THE FOLLOWING JOBS:
1. When greater pulling force is needed,
such as working in a wet field, when
pulling a trailer or when working with
front-end loader.
2. When working in sandy soil.
3. When working on a hard soil where a
rotary tiller might push the tractor
forward.
FRONT WHEEL DRIVE LEVER
(1) Front Wheel Drive Lever
(A) DISENGAGEMENT (B) ENGAGEMENT
C71O428B
PARKING BRAKE LEVER
(1) Parking Brake Lever
INDEPENDENT PTO
The independent PTO mode is used for
normal PTO operations. It operates con-
tinuously at a constant speed, indepen-
dent of the transmission speed
selections. The PTO shaft turns in a
clockwise direction (as viewed from the
rear of the tractor).
GROUND SPEED PTO
The PTO speed will be proportional to
the tractor speed. The PTO shaft will stop
when the tractor is stopped. It is impor-
tant to note the PTO shaft will rotate in
the opposite direction when the tractor
is in reverse.
When parking, be sure to set the parking
brake.
To set the parking brake;
1) Interlock the brake pedals.
2) Depress the brake pedals.
3) latch the brake pedals with the park-
ing brake lever.
To Next Page
Loading...
Need help?
General
