OPERATION 5-21
WHEELS, TIRES AND TREAD
TREADWIDTH - FRONT
The front tread width is not adjustable.
Check and tighten as instructed.
MODEL
DK 65S
Control range
1,406 – 1,802mm
(55.4 - 70.9in.)
TREAD-REAR
WARNING
Do not use tires larger than
specified.
28.5 ~ 34.7 kgf·m
280 ~ 340N.m
206.6 ~ 250.7 lbf.ft
Wheel nut torque
20 ~ 23 kgf·m
196 ~ 226 N.m
144.7 ~166.3 lbf.ft
WARNING
Do not use tires larger than
specified.
Rim bolt torque
28 ~ 32.5 kgf·m
274.6 ~ 318.7N.m
202.6 ~235.0 lbf.ft
Wheel nut torque
WARNING
When leaving the driver’s seat to
attach or detach implements:
Shift the transmission into
neutral.
Set the parking brake.
Slow the engine to idle speed.
Push the draft control lever for-
ward to the floating range.
Keep bystanders clear of the trac-
tor and the implement.
1. Adjust the position (leveling) of the
implement by turning the lift linkage lo-
cated on the right side.
2. After the adjustment, secure with the
lock nut.
3. Positioning is dependent upon the type
of implement.
LEVELING ADJUSTMENT
C71O533B
(1) Lift Linkage
The lever can be controlled from the
ground while attaching or detaching
implements.
EXTERNAL POSITION CONTROL LEVER
C71O534B
(1) External Position Control Lever
To Next Page
Loading...
Need help?
General
