6-20 DK65S
StandardBulb name
Reserve lamp
Head light
Direction indicator (front)
Direction indicator (rear)
Work light
Taillight
Lighting on instrument,
illumination lamp
Bulbs except the above
bulbs on the instrument
Cab interior lamp
12V 10W
12V 55W/60W
12V 21W
12V 21W
12V 35W
12V 21W/5W
12V 3.4W
14V 1.4W
12V 10W
WARNING
Always use the correct type, volt-
age and wattage when replacing
bulbs. The wrong bulb will likely
result in malfunction.
TABLE OF STANDARD BULBS
CHANGING LIGHT BULBS/LAMPS
When a lamp does not work:
1. Check the appropriate fuse.
2. If the fuse is functional, remove the
bulb from its socket and check.
3. If the bulb has an open circuit, replace
it with a bulb of the same type, voltage
and wattage.
SLOW-BLOW FUSE CHANGE
The slow-blow fuse is designed to pro-
tect the electrical system by disconnect-
ing the power source in the event of an
abnormal current draw. If it is blown, the
system should be inspected to correct the
cause.
Uncouple the fuse holder and remove the
blown fuse. Replace it with the genuine
replacement part.
WARNING
Replacing the slow-blow fuse with
anything other than the genuine
DAEDONG replacement part may
cause a fire, electrical system
damage, and personal injury.
C71O629B
(1) Slow-blow Fuse
To Next Page
Loading...
Need help?
General
