To turn on, position the switch
marked (front) to "ON" the position.
The key switch should be positioned
to the "ON" position at this moment.
When stopping the engine with the
work lamps illuminated after (night)
work, the work lamps keep illumi-
nated for 30 seconds to secure the
operator’s visibility for safety.
E
SCORT FUNCTION
Do not drive the tractor on a
road with the work lights ON
at night.
The approaching or following
vehicle’s visibility can be dis-
turbed, which is very danger-
ous for both drivers. In this
case, use the hazard lamps.
•
•
WARNING
1. To turn on, position the switch
marked (wiper) to the "ON" posi-
tion.
(1) Wiper Operating Switch (Front)
(2) Wiper Operating Switch (Rear)
(3) Wiper Front
WIPER
TE1O461A
TE1O462B
(1) Washer Fluid Tank
2. The washer fluid is sprayed
through the nozzle of the wiper by
pressing the switch again with the
key switch in the "ACC" or "ON"
position.
3. The washer uid for the windshield
is installed on the rear left side out-
side the cabin.
To Next Page
Loading...
Need help?
General
