If the air cleaner is not in a good con-
dition, the lifetime of the engine can
be shortened, excessive soot can be
produced, and the engine power can
be deteriorated. Therefore, the lter
should be inspected frequently. Its
replacement interval can be changed
according to driving conditions. Re-
place the filter according to the fol-
lowing procedure:
(1) Filter (2) Cap
(3) Evacuator Valve
REPLACING AIR CLEANER FILTER (AD)
TE1O719A
1. Open the hood and check the suc-
tion hose and air cleaner housing
for damage.
2. Unscrew the air cleaner clip and
remove the cover.
3. Clean the inside of the air cleaner
housing by blowing compressed
air through it.
4. Replace the filter and check the
housing for damage.
5. Install the cover and x it with the
clip.
When installing the cover, make
sure that the dust collection
valve is heading down.
•
NOTE
Use only a genuine lter. Use
of a non-recommended filter
can cause damage to the en-
gine and sensor.
Make sure that no dust enters
the system by installing the
cover rmly.
When removing the filter, be
careful not to let foreign mate-
rial enter the air inlet.
•
•
•
CAUTION
To Next Page
Loading...
Need help?
General
