ENGINE COOLANT TEMPERATURE GAUGE
This gauge indicates the coolant
temperature after the key switch is
turned to the "ON" position.
• C : Coolant is cold.
• H : Coolant is hot.
When the pointer is in the zone “H"
during driving, it means that the en-
gine is overheated. Decrease work
load immediately.
Make sure to control the work
load so that the needle is not
in the red zone.
If the needle stays in the red
zone, do not stop the engine
immediately. Instead, reduce
the work load to cool down
the engine before stopping the
engine.
Make sure to keep the front
grill clean so that air is sucked
through it freely for fast cool-
ing.
•
•
•
CAUTION
(1) Coolant Temperature Gauge
“C” : Cold “H” : Hot
This lamp comes on when the en-
gine oil pressure or oil level is low.
This lamp is turned On when the
starting switch is turned On before
starting the engine but turned Off
after starting the engine. If this lamp
comes on while driving, stop the
engine immediately and check the
engine oil level.
If this lamp comes on even with the
specified engine oil level, have the
ENGINE OIL PRESSURE
WARNING LAMP
To Next Page
Loading...
Need help?
General
