Apply high-quality multi-purpose grease onto the positions in the gure at every 50 hours of operation or whenever nec-
essary and record the operating time when applying it.
LUBRICATING GREASE FITTINGS (O)
(1) Front Bracket Axle Pivot (1) Bevel Gear Case, LH/RH
(1) Top Link Holder (2) Hydraulic Cylinder
(3) Hydraulic Lifting Shaft
TE1O712A
TE1O714A
TE1O717A
TE1O716A
(1) Rear Bracket Axle Pivot