Komatsu 80001 User Manual

30 Testing and adjusting SEN04114-06
PC130-8
29
2. Decreasing tension
1) Loosen valve (1) to discharge grease, and
then tighten it.
k Do not loosen the valve more than
1 turn. If it is loosened more, it
may jump out because of the high-
pressure grease in it.
2) To check that the tension is normal, run
the engine at low idle and move the
machine forward by the length of track on
ground, then stop slowly.
3) After adjusting, check the track shoe ten-
sion again according to the above proce-
dure.

Komatsu 80001 Specifications

General

Brand	Komatsu
Model	80001
Category	Excavators
Language	English