EasyManuals Logo
Home>Komatsu>Excavators>80001

Komatsu 80001 User Manual

Komatsu 80001
1043 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #714 background imageLoading...
Page #714 background image
SEN04123-01 40 Troubleshooting
40 PC130-8
E-20 Power maximizing function does not operate normally 1
Circuit diagram related
Trouble
(1) When left knob switch is pressed, one-touch power maximizing monitor is not displayed.
(2) When left knob switch is pressed, work equipment power is not increased.
Related infor-
mation
• One-touch power maximizing function does not work when working mode is not power mode (P) or
economy mode (E).
• Condition of left knob switch signal can be checked with monitoring function.
(Code: 02200 Switch input 1)
Possible causes
and standard
value in normal
state
Cause Standard value in normal state/Remarks on troubleshooting
1 Defective fuse No. 9 If fuse is broken, circuit probably has ground fault. (See cause 4.)
2
Defective left knob switch
(Internal disconnection)
a Prepare with starting switch OFF, then carry out troubleshoot-
ing without turning starting switch ON.
S11 (male) Left knob switch Resistance
Between (1) – (2)
Released Min. 1 Mz
Pressed Max. 1 z
3
Disconnection in wiring har-
ness (Disconnection in wiring
or defective contact in con-
nector)
a Prepare with starting switch OFF, then carry out troubleshoot-
ing without turning starting switch ON.
Wiring harness between F01-9 – S11
(female) (1)
Resis-
tance
Max. 1 z
Wiring harness between S11 (female) (2) –
CP01 (female) (41)
Resis-
tance
Max. 1 z
4
Ground fault in wiring har-
ness (Short circuit with GND
circuit)
a Prepare with starting switch OFF, then carry out troubleshoot-
ing without turning starting switch ON.
Wiring harness between F01-9 – S11
(female) (1) and chassis ground
Resis-
tance
Min. 1 Mz
Wiring harness between S11 (female) (2) –
CP01 (female) (41) and chassis ground
Resis-
tance
Min. 1 Mz
5 Defective pump controller
a Prepare with starting switch OFF, then carry out troubleshoot-
ing without turning starting switch ON.
CP01 (female) Left knob switch Resistance
Between (41) –
chassis ground
Released Min. 1 Mz
Pressed Max. 1 z
6 Defective machine monitor
Machine monitor may be defective. (Since trouble is in system,
troubleshooting cannot be carried out.)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Komatsu 80001 and is the answer not in the manual?

Komatsu 80001 Specifications

General IconGeneral
BrandKomatsu
Model80001
CategoryExcavators
LanguageEnglish

Related product manuals