P02050 10/06 Lubrication and Service P2-15
500 HOUR LUBRICATION AND MAINTENANCE CHECKS (Continued)
Truck Serial Number______________________ Site Unit Number_______________ Date_______________
Hourmeter_____________ Name of Service Technician___________________________________
TASK COMMENTS CHECKED INITIALS
10. WHEEL MOTOR OIL SAMPLING - Refer to Section
G5, Wheel Motor, for oil sampling information.
11. WHEEL MOTOR OIL (Initial 500 hours only) -
Change or filter wheel motor gear oil only after initial
500 hours or operation. Wheel motor gear oil must be
filtered or changed every 2500 hours of operation
thereafter.
12. VHMS DATA DOWNLOAD - Using a laptop PC with
the VHMS Technical Analysis Tool Box program, per-
form a data download from the VHMS controller.
Send the data to WebCARE using the FTP feature.
Refer to Section D in the shop manual for more
detailed instructions.
13. FRONT BRAKE DISC - Measure the thickness of the
disc. If 20 to 25% of the disc wear surface is worn
below 28.7 (1.13 in.), the disc must be replaced.
Refer to the shop manual, Parking Brake, Section J,
for additional information.
14. FRONT WHEELS - Take an oil sample of the front
wheel bearing oil. Refer to Section G in this shop
manual for detailed instructions.
To Next Page
Loading...
