.
OPERATION
OPERATION
PUSHER OPERATIONS
When carrying out pusher operations, always install a pusher
plate.
When approaching the other machine, depress the decelerator
pedal to reduce the engine speed and approach slowly. After
coming into contact, raise the travel speed slowly and push with
full power.
SMOOTHING
NOTICE
Avoid smoothing on rocky or stony ground. It can damage the blade.
When finishing the ground surface to a smooth finish after digging
or filling operations, keep a full load of soil in the blade and operate
the blade up or down in small movements while traveling forward.
When leveling windrows or ruts left by the tracks, set the blade to
the FLOAT position, travel at low speed in reverse and drag the
blade over the ground surface.
3 - 119
To Next Page
Loading...
Need help?
General
