.
SAFETY
PRECAUTIONS FOR MAINTENANCE
PRECAUTIONS FOR MAINTENANCE
WARNING TAG
Always attach the "DO NOT OPERATE" warning tag to the work
equipment control lever in the operator's cab to alert others that
you are performing service or maintenance on the machine.
Attach additional warning tags around the machine if necessary.
Warning tag Part No. 09963-03001
Keep the tag in the operation manual pocket.
When carrying out inspection or maintenance, ALWAYS attach
the "DO NOT OPERATE" warning tag to the blade control lever
in the operator's cab to alert others that you are working on the
machine. Attach additional warning tags around the machine in
necessary.
Warning tag Part No. 09963-A1640
This tag is placed in the same case as is this operation and
maintenace manual.
If others start the engine, or touch or operate the work
equipment control lever while you are performing service or
maintenance, you could suffer serious injury or property
damage.
KEEP WORK PLACE CLEAN AND TIDY
Do not leave hammers or other tools lying around in the work place. Wipe up all grease, oil, or other substances
that will cause you to slip. Always keep the work place clean and tidy to enable you to carry out operations safely.
If the work place is not kept clean and tidy, there is the danger that you will trip, slip, or fall over and injure yourself.
APPOINT LEADER WHEN WORKING WITH OTHERS
When repairing the machine or when removing and installing the work equipment, appoint a leader and follow his
instructions during the operation.
When working with others, misunderstandings between workers can lead to serious accidents.
2 - 27
To Next Page
Loading...
Need help?
General
