.
MAINTENANCE
SERVICE PROCEDURE
WHEN LOOSENING TENSION
WARNING
It is extremely dangerous to release the grease by any method except the procedure given below.
If track tension is not relieved by this procedure, contact your Komatsu distributor for repairs.
1.
Loosen lubricator (1) gradually to release the grease.
2.
When loosening lubricator (1), turn it a maximum of one turn.
3. If the grease does not come out smoothly, move the machine
forwards and backwards a short distance.
4.
Tighten lubricator(1).
5. To check that the correct tension has been achieved, move the
machine backwards and forwards.
6.
Check the track tension again, and if the tension is not correct,
adjust it again.
4 - 29
To Next Page
Loading...
Need help?
General
