.
OPERATION
EXPLANATION OF COMPONENTS
PARKING BRAKE LEVER
WARNING
When parking the machine, always set the parking brake lever in the LOCK position.
If the parking brake lever is operated, the brake is applied, even when the machine is traveling.
The machine will suddenly stop, so this is dangerous. For this reason, do not operate the parking brake lever when the
machine is moving, except in emergencies.
This lever (2) operates the parking brake. The parking brake is
applied when it is in the LOCK position.
REMARK
Before moving the parking brake lever to the LOCK position,
return the steering, forward-reverse, gear shift lever to the
NEUTRAL position.
When starting the engine, if the parking brake lever is not in the
LOCK position, the limit switch is actuated and it is impossible
to start the engine.
JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIFT LEVER)
This control lever (3) serves to change forward or reverse direction
of machine travel, steer the machine to the right or left, change the
traveling speed and make a counter-rotation.
Forward-reverse shifting
Position (a): FORWARD
Position (b): REVERSE
Position N: Neutral
Move to the front to drive forward; move to the rear to drive in
reverse.
Steering
Position (L): Left turn
Position (R): Right turn
With the lever moved to the front or rear, operate the lever partially to the left or right to turn the machine. The
machine will turn gradually in the same direction as the lever is operated.
If the lever is moved fully to the left or right, the machine will turn in a small radius.
REMARK
When moving the joystick lever, and the lever is released, it will return to (a) or (b) and the machine will travel in a
straight line.
3 - 39
To Next Page
Loading...
Need help?
General
