.
MAINTENANCE
MAINTENANCE SCHEDULE CHART
MAINTENANCE SCHEDULE CHART
MAINTENANCE SCHEDULE CHART
The maintenance interval for adjusting the injector differs according to the exhaust gas regulations for each area.
When carrying out the adjustment, check the maintenance time. For details, see "ADJUST INJECTOR (PAGE
4-18)".
INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
REPLACE POWER TRAIN OIL FILTER ELEMENT 4- 55
CHANGE OIL IN POWER TRAIN CASE, WASH STRAINER (POWER TRAIN PUMP STRAINER,
SCAVENGING PUMP STRAINER) 4- 56
CHANGE OIL IN FINAL DRIVE CASE 4- 59
CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT, CLEAN
HYDRAULIC TANK STRAINER 4- 63
WHEN REQUIRED
CLEAN INSIDE OF COOLING SYSTEM 4- 20
CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT 4- 24
CHECK AND ADJUST TRACK TENSION 4- 28
CHECK AND TIGHTEN TRACK SHOE BOLTS 4- 30
ADJUST IDLER CLEARANCE 4- 31
REVERSE AND REPLACE THE END BITS AND CUTTING EDGES 4- 33
CLEAN, CHECK RADIATOR FINS AND OIL COOLER FINS 4- 34
CLEAN FUEL TANK STRAINER 4- 36
DRAIN WATER AND SEDIMENT IN FUEL TANK 4- 36
CLEAN STEERING CLUTCH CASE BREATHER 4- 36
CHECK UNDERCARRIAGE OIL 4- 37
CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER) 4- 38
CHECK AND ADJUST AIR CONDITIONER 4- 38
LUBRICATE DOOR HINGE 4- 40
CHECK DOOR LATCH 4- 40
CHECK DOOR LOCK STRIKER 4- 40
REPLACE DOOR DAMPER 4- 41
CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID 4- 41
REPLACE WIPER BLADE 4- 42
BLEEDING AIR IN HYDRAULIC SYSTEM 4- 43
CHECK ELECTRICAL INTAKE AIR HEATER 4- 43
LUBRICATING 4- 43
CHECK BEFORE STARTING
EVERY 250 HOURS SERVICE
LUBRICATING 4- 45
CHECK ALTERNATOR DRIVE BELT TENSION, ADJUST 4- 47
CHECK LEVEL OF BATTERY ELECTROLYTE 4- 48
CHECK BRAKE PERFORMANCE 4- 50
CHECK OIL LEVEL IN DAMPER CASE, ADD OIL 4- 51
4 - 16
To Next Page
Need help?
General
