DRIVING
5-16
DRIVING
START-UP
• Careless driving may lead to accidents!
• Before starting to drive, ensure that no persons are near
the machine and sound the horn before you drive up.
1. Start up the engine as described in chapter "Starting the En-
gine".
2. Raise the work unit into its transport position. If the work unit
is in transport position, the two red arrows of the transport
position marking on the lifting cylinder are next to each oth-
er.
3. Turn the lock lever for the work unit to position ’1’. The boom
will then be blocked during rides on public roads and cannot
be moved.
4. Press down the brake pedal and hold it in this position.
5. Release the parking brake. Press the celebration adjustment
knob to this at the parking brake lever. Press down the lock-
ing button of the parking brake lever. Then, release the lock-
ing button. The parking brake warning light goes out.
75_15
75_154d
To Next Page
Loading...
Need help?
General
