GENERAL SAFETY MEASURES
3-4
CLOTHING AND PERSONAL PROTECTION
• Do not wear loose-fitting clothing, jewellery, or open long
hair. There is danger that you get caught by control ele-
ments or moving parts leading to serious injuries.
• Immediately replace clothing stained with highly inflamma-
ble substances.
• When operating and servicing the machine, wear the appro-
priate protective equipment, e.g. safety helmet, safety gog-
gles, safety shoes, dust protection mask, and safety gloves.
• Always wear safety goggles, safety helmet, and protective
clothing, if it is likely that chippings or splinters will be pro-
duced while operating the machine (e.g. when removing or
driving in bolts or cleaning with compressed air).
• Ensure that no unauthorised person is within the danger
zone.
MACHINE MODIFICATIONS
• Komatsu will not be liable for modifications performed with-
out prior expressed consent by the manufacturer.
• Komatsu will not be liable for any injuries or damage result-
ing from unapproved modifications.
BEFORE YOU LEAVE THE DRIVER'S SEAT
1. Lower the work unit onto the ground.
2. Switch off the engine.
3. Press slowly the multi-function lever to the front into position
’S’. The remaining hydraulics pressure will be reduced.
4. Remove the ignition key before you leave the driver's seat.
Store the ignition key in a safe place.
5. Close the cabin door.
75_016
To Next Page
Loading...
Need help?
General
