USE OF THE MACHINE AND RELATED CONTROLS
140
WEAM009300
3.3.16 CHECKING THE MACHINE EVERY DAY AFTER WORK
3.3.16.1 BEFORE STOPPING THE ENGINE
At the end of work, before stopping the engine, check the engine
coolant temperature warning light (1), the engine oil pressure
warning light (2) and the fuel level on the gauge (3).
3.3.16.2 AFTER STOPPING THE ENGINE
1. Walk around the machine, check the work equipment, the outside of the machine and the undercarriage, and
make sure that there are no oil or coolant leakages. If any anomaly is observed, provide for the necessary
repairs.
2. Fill the fuel tank.
3. Check the engine compartment for paper and debris. Remove any paper and debris to avoid a fire hazard.
4. Remove any mud that may be attached to the undercarriage.
3.3.17 LOCKING THE MACHINE
Always lock the following parts:
(1) Engine hood
(2) Radiator cover
(3) Document and tool compartment cover.
(4) Cab door (machines with cab).
Always close the windows.
For further details, see paragraph "3.2.5 COVERSWITH LOCK".
NOTE
q Use the ignition key to open and lock these covers.
RKA23000
To Next Page
Loading...
Need help?
General
