PRODUCT IDENTIFICATION
6
WEAM009300
1.4 PRODUCT IDENTIFICATION
The Komatsu excavator and its main components are identified by serial numbers stamped on the identification
plates.
The serial number and the identification numbers of the components are the only numbers that must be
communicated to the Dealer when requiring assistance and ordering spare parts.
1.4.1 MACHINE SERIAL NUMBER
The machine serial number is stamped on the front upper part of
the main frame, on the left side.
1.4.2 MACHINE IDENTIFICATION PLATE
AND PRODUCT IDENTIFICATION
NUMBER (PIN)
The Komatsu excavators described in this manual are CE
marked, in fact they are in compliance with the EU harmonised
standards.
The plate with the CE marking is applied to the front wall of the
main frame, on the right side.
RKAB5040
RKAB5050
RKA18100
MODEL
SERIAL No.
MANUFACT.YEAR
MASS MIN/MAX
ENGINE POWER
kg
kw
Product Identification Number
MANUFACTURER
22L-09-R1371
KOMATSU UTILITY EUROPE S.p.A 36025 NOVENTA VICENTINA (VI) - I
UNDER LICENSE OF KOMATSU LTD., TOKYO, JAPAN
To Next Page
Loading...
Need help?
General
