Konica Minolta Bizhub 282 User Manual

9
Specifying settings using PageScope Web Connection
9-58 bizhub 362/282/222
9.12 RX Document (Administrator mode)
The method for processing a received document can be specified. This can
be specified only for documents received over a network.
The following processing methods are available.
- Processing documents received on each line (Port): Specify the operation
performed, such as printing or forwarding the received document, for
each line where a document is received.
- Processing all other received documents (All Other Documents): Specify
the processing method of documents received on lines other than ports.
If "Port" is clicked, settings can be specified for the following.
If "All Other Documents" is clicked, settings can be specified for the
following.
2
Note
If bit 7 of mode 306 is set to "1" in the Soft SW Setting screen, only "Port"
is available. For details, refer to "Specifying software switch settings
(machine functions)" on page 10-28.
Item Description
Distribution
Conditions
Select whether or not an operation is performed when a document is received
on the selected line.
Auto: Select this setting to not process the received document
Specifies: Select this setting to specify where the received document is saved
or forwarded.
RX Doc. Set-
tings
When "Distribution Conditions" is set to "Specified", select the processing
method for the received document.
Forward: Select this setting to forward the data to the specified destination.
Print: Select this setting to print the document.
Print & Forward: Select this setting to print the document and forward the data
to the specified destination.
Forwarding
Destination
Specify a forwarding destination when "RX Doc. Settings" is set to "Forward".
Click [Select Forwarding Destination], select the forwarding destination ad-
dress, and then click [Apply].
Item Description
RX Doc. Set-
tings
Select how the received document is processed.
Memory RX: Select this setting to save the document in the memory.
Forward: Select this setting to forward the data to the specified destination.
Print: Select this setting to print the document.
Print & Forward: Select this setting to print the document and forward the data
to the specified destination.
Forwarding
Destination
Specify a forwarding destination when "RX Doc. Settings" is set to "Forward".
Click [Select Forwarding Destination], select the forwarding destination ad-
dress, and then click [Apply].

Konica Minolta Bizhub 282 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A4
Duplex Printing	Yes
Printing Technology	Laser
Original Size	A4
Print Speed	28 ppm
Copy Speed	28 cpm
Network Connectivity	Ethernet
USB Connectivity	Yes
Zoom Range	25% - 400%
Scan Speed (B&W)	28 ipm