Konica Minolta Bizhub 282 User Manual

Specifying management settings
10
bizhub 362/282/222 10-25
Specifying the processing of documents received on other lines
You can specify the processing method for documents received on lines
other than a port.
The following settings can be specified.
2
Note
If bit 7 of mode 306 is set to "1" in the Soft SW Setting screen, only "Port"
is available. For details, refer to "Specifying software switch settings
(machine functions)" on page 10-28.
Item Description
RX Doc. Settings When "Distribution Conditions" is set to "Specified", select the
processing method for the received document.
Print: Prints the document.
Forward: Forwards the data to the specified destination.
Print and Forward: Prints the document and at the same time
forwards the data to the specified destination.
Memory RX: Receives the memory by force.
Forwarding Dest Specify the forwarding destination if "Forward" is selected in the
Setting of RX Doc. screen.
Touch [Next Destination], touch the button for the recipient’s
address, and then touch [Enter].

Konica Minolta Bizhub 282 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A4
Duplex Printing	Yes
Printing Technology	Laser
Original Size	A4
Print Speed	28 ppm
Copy Speed	28 cpm
Network Connectivity	Ethernet
USB Connectivity	Yes
Zoom Range	25% - 400%
Scan Speed (B&W)	28 ipm