10
Specifying management settings
10-60 bizhub 362/282/222
Specifying settings for limiting user authentication to only Scan
functions (mode 479)
Specify whether or not user authentication is performed only when the
[Fax/Scan] or [Extra Scan] key is pressed.
Factory settings
Specifying the setting
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
2
Reminder
Do not specify settings for mode 479 other than those described in
"Specifying the setting".
!
Detail
If user authentication is limited to Scan functions, touch [Account/User
Auth.] in the Administrator Management 1 screen, and then select
"External Server" as the user authentication method. For details on the
external server authentication settings, refer to the User manual [Copy
Operations].
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7, 6, 5 ----------------------
000 *Do not change these bits
when specifying settings
for this function.
----------
4, 3, 2, 1, 0 Specifies whether or
not to limit authenti-
cation on Fax and
Scan functions.
11001 Limited ----------
00000 Not limited
To Next Page
Loading...
Need help?
General
