Setup
3
bizhub 362/282/222 3-51
3.13 Specifying e-mail server settings
To be able to use the scanning functions of this machine, it is necessary to
specify certain settings according to the network environment of the
machine. For the required settings, contact your network administrator.
To the network administrator
The following settings are required to be able to use the scanning functions
of this machine. For each setting, refer to the operation manual for the e-mail
server.
- IP address of this machine
- E-mail account (e-mail address) of this machine
- POP3 user name and POP3 password of this machine
- Acquisition of SMTP for the account that is the sub-domain of this
machine (device domain name)
- Specify the delivery of e-mail from the e-mail server to this machine (DNS
server setting)
When setup of the network is complete, inform the users of this machine of
the information described below.
- The network subnet mask to connect to this machine
- The network gateway address to connect to this machine
- The IP address and host name (when using DNS) of the SMTP server
- The IP address and host name (when using DNS) of the POP3 server
To Next Page
Loading...
Need help?
General
