Setup
3
bizhub 362/282/222 3-19
3.6 SMTP Settings
Settings can be specified for the following.
2
Note
The following appear when bits 6 and 2 of mode 380 are set to "1" in the
Software Switch Setting screen. For details, refer to "Specifying software
switch settings (machine functions)" on page 10-28.
- SMTP Authentication User Name
- SMTP Authentication Password
If bit 4 of mode 371 is set to "1" in the Software Switch Setting screen,
two SMTP servers can be registered. For details, refer to "Specifying
software switch settings (machine functions)" on page 10-28.
Item Description
SMTP Server Address Specify when performing Scan to E-Mail or Internet faxing. In addi-
tion, specify when using the E-Mail notification function with Scan to
FTP, Scan to SMB or Scan to HDD.
Contact the network administrator for the information to be entered.
E-Mail Address Enter the e-mail address of this machine.
Contact the network administrator for the information to be entered.
SMTP Authentication
User Name
Specify the user name when using the e-mail transmission authenti-
cation (SMTP authentication) function.
Contact the network administrator for the information to be entered.
It is not necessary to specify the setting when the SMTP authentica-
tion user name and the POP3 user name are the same.
SMTP Authentication
Password
Specify the password when using the e-mail transmission authenti-
cation (SMTP authentication) function.
Contact the network administrator for the information to be entered.
It is not necessary to specify the setting when the SMTP authentica-
tion password and the POP3 password are the same.
To Next Page
Loading...
Need help?
General
