Konica Minolta Bizhub 282 User Manual

3
Setup
3-4 bizhub 362/282/222
3.2 Specifying the network settings
The operations that are available depend on the LAN environment of the
machine.
Specify the network settings according to the LAN environment and the
operation to be performed.
!
Detail
Before specifying any settings, contact your network administrator for
the required information.
Specify the network settings in Administrator mode by using either this
machine’s control panel or PageScope Web Connection. The setting
procedure using this machine’s control panel is described below.
To specify the settings using on PageScope Web Connection, refer to
Chapter 8, "Specifying settings using PageScope Web Connection" on
page 9-3.
Network setting table
The network settings required for each operation are described below.
o: A setting is required.
+: A setting is required depending on the environment.
0: The parameter is available.
– : The parameter is not available.
Operation
Parameter
Scan to
E-Mail
Scan to
FTP
Scan to
SMB
Scan to
HDD
Internet
faxing
Basic Settings
DHCP +++++
IP Address Setting ooooo
Subnet Mask ooooo
Gateway ooooo
Self-Domain Name–––––
Network Board Set +++++
DNS Settings
YES/NO +++++
Host Name +++++
Domain Name +++++
DNS Server Address +++++

Konica Minolta Bizhub 282 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A4
Duplex Printing	Yes
Printing Technology	Laser
Original Size	A4
Print Speed	28 ppm
Copy Speed	28 cpm
Network Connectivity	Ethernet
USB Connectivity	Yes
Zoom Range	25% - 400%
Scan Speed (B&W)	28 ipm