Konica Minolta Bizhub 282 User Manual

9
Specifying settings using PageScope Web Connection
9-70 bizhub 362/282/222
9.16 LDAP (Administrator mode)
The settings used by the LDAP (Lightweight Directory Access Protocol)
server in a network can be specified.
Settings can be specified for the following.
Specifying the LDAP settings
1 In the Administrator mode, click the Network tab.
– For the procedure to log on to Administrator mode, refer to
"Logging on to Administrator mode" on page 9-11.
2 Click [Common Setting], then [LDAP].
3 Select whether to enable or disable LDAP searches, and then click
[Apply].
Item Description
LDAP Select whether to enable or disable address searches where the LDAP server
is used. If "Enable" is selected, the LDAP server can be specified.
Search Default
Setting
Select which of the registered LDAP servers is to be accessed. This parame-
ter appears if an LDAP server has been registered.

Konica Minolta Bizhub 282 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A4
Duplex Printing	Yes
Printing Technology	Laser
Original Size	A4
Print Speed	28 ppm
Copy Speed	28 cpm
Network Connectivity	Ethernet
USB Connectivity	Yes
Zoom Range	25% - 400%
Scan Speed (B&W)	28 ipm