Konica Minolta Bizhub 282 User Manual

Setup
3
bizhub 362/282/222 3-3
3Setup
3.1 Connecting to a LAN
This machine communicates with the TCP/IP protocol using a LAN.
Therefore, a LAN cable must be connected.
To connect to a LAN, use a LAN cable (Fast Ethernet 100BASE-TX cable).
Connecting the LAN cable
Connect the LAN cable connector to the port (LAN) on the right of this
machine and the other end to the hub.
The port is located on the right side of the machine.
Use a Fast Ethernet 100BASE-TX (category 5) cable for the LAN cable.
2
Note
The LAN cable is not supplied with this machine. Use a suitable cable for
the installation environment.
The status of each LED is described below.
LED color Status Description
Green and yellow Off The machine is not turned on.
The LAN is not properly connected.
Green On The LAN is properly connected (100 Mbps).
Flashes Data is being received (100 Mbps).
Yellow On The LAN is properly connected (10 Mbps).
Flashes Data is being received (10 Mbps).

Konica Minolta Bizhub 282 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A4
Duplex Printing	Yes
Printing Technology	Laser
Original Size	A4
Print Speed	28 ppm
Copy Speed	28 cpm
Network Connectivity	Ethernet
USB Connectivity	Yes
Zoom Range	25% - 400%
Scan Speed (B&W)	28 ipm